@

Friday, March 16, 2012

How to Replace Compressor Clutch & Field Coil on Ford F series Trucks?

The details to replace Clutch & Field Coil:---


  1. Remove the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor R&I.
  2. Remove the A/C clutch disc and hub bolt. 




image 
Fig. 1. A/C clutch disc and hub bolt 2. A/C clutch disc and hub 3. A/C clutch disc and hub spacer 4. A/C compressor pulley snapring 5. A/C compressor pulley 6. A/C clutch field coil Clutch and field coil

  1. Click image to see an enlarged view
    Fig. Using the special tool, hold the A/C clutch disc and hub
  2. Using the special tool, hold the A/C clutch disc and hub.
  3. Remove the A/C clutch disc and hub bolt.
  4. Remove the A/C clutch disc and hub.
  5. Remove the A/C clutch disc and hub spacer(s).
  6. Remove the A/C clutch pulley snapring.
    WARNING
    Do not use air tools. Damage to the A/C compressor pulley or A/C compressor may result.



    Click image to see an enlarged view
    Fig. Remove the A/C compressor pulley
  7. Remove the A/C compressor pulley.
    WARNING
    Do not use air tools. Damage to the A/C clutch field coil or A/C compressor may result.



    Click image to see an enlarged view
    Fig. Remove the A/C clutch field coil
  8. Remove the A/C clutch field coil.
To install:

NOTE
If installing a new A/C compressor, the A/C clutch components should be reused unless obvious signs of damage are found. If excessive grooving is found, a new A/C clutch disc and hub and A/C compressor pulley must be installed together. Otherwise, each component can be installed individually where needed.

  1. Visually inspect the A/C clutch disc and hub, A/C compressor pulley and A/C clutch field coil for damage.
    WARNING
    Do not use air tools. Damage to the A/C clutch field coil or A/C compressor may result.



    Inspect for physical damage, including cracked or melted components or discoloration due to excessive heat.
    Inspect for excessive wear, including grooving in the A/C clutch disc and hub or A/C compressor pulley that is more than fingernail depth.
    Inspect for roughness in the A/C compressor pulley bearing.
  2. Install the A/C clutch field coil.

    Click image to see an enlarged view
    Fig. Install the A/C clutch field coil


    Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector correctly positioned.
    Place the special tool on the A/C clutch field coil.
    Place special tool 412-065 on special tool 412-078.
    Use the special tool to install the A/C clutch field coil.
  3. Install the A/C compressor pulley.
  4. Install the A/C compressor pulley snapring.
  5. Install the A/C clutch disc and hub spacer(s) and the A/C clutch disc and hub.
  6. Install the A/C clutch disc and hub bolt.
    1. Hold the A/C clutch disc and hub with the special tool
    2. Tighten to 13 Nm (10 ft. lbs.).

      Click image to see an enlarged view
      Fig. Measuring the air gap
  7. Measure and adjust the clutch air gap by adding or removing A/C clutch disc and hub spacers.
  8. Install the A/C compressor.

The procedure is similar for both ford and Lincoln car models:-----

These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


No comments:

Post a Comment